Did you know that over 90% of homes have a garage door to their garage? Did you also know that this is one of the most popular home appliances? That’s right. The garage door is so common and widely used that it’s almost a ubiquitous device. The garage door is not just a standard security feature, but a practical system that improves the aesthetics and value of your house. However, these high-end doors can be quite expensive, especially if they need maintenance or repair work done on them. If you find yourself with a broken or malfunctioning garage door and don’t know what to do about it, we are here to help. In this blog post, we will go over some common issues people face when using their garage doors and how you can fix them. Let’s get started!
The Remote Doesn’t Work
If you notice that your remote doesn’t seem to be working correctly, there could be a couple of reasons why. First, if you have a very old garage door opener, it could be dying and simply be worn out. These types of garage door openers are often responsible for a lot of signal interference, which can result in missed or incorrect commands sent to your door. There are also a couple of issues that can cause your remote to malfunction. First, a bad battery can cause interference or simply not work at all. If you have a garage door opener that works on a frequency of 390 MHz, you can easily buy a new battery for it and be back in business. On the other hand, if you have a garage door opener that operates on a frequency of 433 MHz, you may need to purchase a whole new remote.
Your Door Is Off Track
If you notice that your garage door is off track, you may have a broken track or your rollers may be misaligned. If your track is broken, you can simply replace it with a new one. These parts are often sold in kits, so you’ll likely find what you need to replace the broken track in one purchase. If your rollers are misaligned, you can simply adjust them back into place with some pliers. To properly align your rollers, line up the two marks that are found on either side of your track. Once you line them up, you will likely hear a clicking sound, indicating that your track is back in place.
There’s A Problem With Your Springs
If you notice that your springs are broken, you may wonder what to do about it. Thankfully, garage door springs are very easy to replace. You can do it yourself, but you must be careful to not get hurt. You may also want to call a professional to do the job for you. Your springs are very heavy, so you don’t want to risk getting hurt or injuring someone else trying to remove them. When replacing your springs, make sure you get the same ones you currently have. They are often labeled with a number, so make a note of what type of springs you have now so you can buy the same type later.
There’s Something Wrong With The Controller
If you notice that there is something wrong with your controller, it’s usually a good idea to contact a professional. Garage door openers are very complex devices, and often times, homeowners aren’t qualified to fix them. Trying to fix a controller yourself can be very dangerous, especially if something goes wrong. If you decide to attempt to fix it yourself, make sure you are wearing proper safety gear. Also, make sure you are very careful when handling the wiring, as it is often very dangerous.
You Have A Broken Spring Stop
If you notice that your spring stop is broken, you may have trouble opening or closing your garage door. Your spring stop keeps your springs in place so they don’t break your garage door. If you have a broken spring stop and your garage door is open, you could injure someone if the springs suddenly break. If you have a broken spring stop and your garage door is closed, it could break your door. We recommend that you get a broken spring stop fixed as soon as possible, as it is a serious safety hazard. If you can’t fix it yourself, you can always call a professional.
You Need New Belt(s)
If you notice that one or both of your garage door belt(s) has snapped, you can replace it. It is an easy job that requires a few tools and can easily be done by yourself. All you need to do is remove your old belt(s), put the new ones in their place, and close your garage door a few times to make sure they work properly. If you’re having issues with your garage door, hopefully this list helps you identify the root cause of the problem. If you have any questions or concerns, don’t hesitate to call a professional garage door repair team such as Roller Door Repairs Perth.